Pitbike Captive Wheel Spacer for 15mm Axles.
Replacement upgraded wheel bearing and press in Captive Wheel Spacer. Perfect to press in and stay part of your wheel. Saves the spacers dropping out during wheel changes. Supplied Bearing is oversized for the spacer to lightly press inside it and allow for the standard 15mm axle to still be used.
Kit Contains ONE wheel bearing and Spacer, mix and match to get the correct fit for your wheels.
Spacer OD is 25mm so it has a larger surface area to help from marring the swingarm like the small steel ones do.
Step lip OD is 22mm and will allow to fit the seals if you use them.
Length is measured from the step lip base and you need to add +1mm to your desired length as these are 10mm bearings not the 11mm as standard fitment.
Spacers are CNC Made from 6082 T6 Aluminium.
Bearing brand: FAG, SKF, NSK, KOYO or equivalent quality.
Range of spacer sizes to cover all fitments and wheel setups, including Mobster, Vortex, M2R, Symoto, MAG, SDG, VMC.
Spacer and bearing upgrade fit any wheel setup that uses the 6202 bearing.
To install:
Simply remove your existing 6202 bearing and fit the supplied one in the kit, ensuring the spacer tube is aligned and the bearing is fully seated home.
Lightly press the correct Captive Spacer into each side all the way.
Supermoto Spacers COMING SOON!
Pitbike Captive Wheel Spacer for 15mm Axles.
Replacement upgraded wheel bearing and press in Captive Wheel Spacer. Perfect to press in and stay part of your wheel. Saves the spacers dropping out during wheel changes. Supplied Bearing is oversized for the spacer to lightly press inside it and allow for the standard 15mm axle to still be used.
Kit Contains ONE wheel bearing and Spacer, mix and match to get the correct fit for your wheels.
Spacer OD is 25mm so it has a larger surface area to help from marring the swingarm like the small steel ones do.
Step lip OD is 22mm and will allow to fit the seals if you use them.
Length is measured from the step lip base and you need to add +1mm to your desired length as these are 10mm bearings not the 11mm as standard fitment.
Spacers are CNC Made from 6082 T6 Aluminium.
Bearing brand: FAG, SKF, NSK, KOYO or equivalent quality.
Range of spacer sizes to cover all fitments and wheel setups, including Mobster, Vortex, M2R, Symoto, MAG, SDG, VMC.
Spacer and bearing upgrade fit any wheel setup that uses the 6202 bearing.
To install:
Simply remove your existing 6202 bearing and fit the supplied one in the kit, ensuring the spacer tube is aligned and the bearing is fully seated home.
Lightly press the correct Captive Spacer into each side all the way.
Supermoto Spacers COMING SOON!
